True Walk Away staining & CoverslippingTissue-Tek Prisma® Plus & Tissue-Tek Film® enables optimized and consistent high quality results for both routine and special staining and coverslipping.
Improving the most reliable and productive stainer and coverslipper platform in the market. This true walk-away system is further enhanced to produce consistent high quality slides, meeting specific diagnostic requirements. It's barcode reading capabilities enables laboratories to track and trace slides and determine the status real-time.
Tissue-Tek Prisma® Plus & Tissue-Tek Film® enables optimized and consistent high quality routine and special staining. With quality controlled and Ready-to-Use H&E staining kits laboratories ensure slide-to-slide consistency. This results in crisp images with clear morphological and nuclear detail.
Quality is further enhanced with optimized protocols and specialized Sakura application support. Integrated track & trace capability through slide barcode reading enhances laboratory quality assurance. Determine the status of slides real-time and stay in control.
Power requirements AC 220-240 V, 50/60 Hz, 4,5Amp
Dimensions in cm (W x D x H) 125 x 71 x 63
Weight 150 kg
Process modes Continuous or batch mode
Process capacity 1 to 60 slides per run (Standard configuration)
1 to 660 slides per hour (Continuous mode)
Throughput Method dependent
Maximum static water pressure: 0.83 Mpa
Dynamical pressure: 0.098 to 0.441 Mpa
Water temperature: Lower than 30ºC (86ºF), no freezing
Diameter of Plumbing More than 1.27 cm (1/2”)
Washing method Overflow
Drain capacity More than 15 liters per minute, anti-backflow pressure.
Diameter of Plumbing More than 40A (1 ½”)
Reservoir Capacity/Fill Volumes
Standard configuration 30 reservoirs
Expanded configuration 54 reservoirs
Special stain configuration 8 reservoirs
Standard reservoirs 680-820 ml
Expanded reservoirs 255-285 ml
Special stain reservoirs 169-180 ml
Wash reservoirs 850 ml (volume up to overflow level)
Start/End reservoirs 690-830 ml
Drying stations(2) 30-65ºC
Heating stations (2) 30-70ºC; settable per station
Start station One to three user-defined positions
End station One to three user-defined positions
Program-End station One user-defined position
Wash station Zero to four user-defined positions
Number of staining programs Up to 50
Number of configurations Up to 50
Number of processing steps Up to 50
Number of Solution names Up to 100
Step processing time 0 to 99 minutes 59 seconds in 1 seconds increments
Timing accuracy User-defined as exact, 20% variable, 50% variable or
Agitation method Robotic arm movement and enhanced wash feature.
Amplitude, speed and frequency are programmable.
Fume control Aspirating fan drawing fumes through a filter.
Optional duct connection adaptor, diameter 38 mm or 75
Reagent Management System Settable per reservoir, counting runs, days or not in use.
Process monitor TFT colour touch screen
Languages English, French, German, Italian, Spanish, Japanese or
Exporting data 128 mb compact Flash card
External Interface Power outage detection
External Arm output
Printer output (RS232)
Ethernet (10-BaseT) port
Alarms Audible beeps and screen display messages
Diagnostic function Self diagnosis, error messages and codes
Safety features Door and cover closure sensors
Overheating safety heating and drying stations
Safety Standards IEC 61010-1 2nd ed., CAN/CSA C22.2 No. 61010-1, UL
Password protection Four administrator and twenty user passwords.
Country of Origin Japan
Tissue-Tek® Prisma™ Routine Stain 220V; 50W
Tissue-Tek® Prisma™ Special Stain 220V; 50W
Link Between Tissue-Tek® Prisma & Film